Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY (for TMMK Made)

REAR LIGHT ASSEMBLY (for TMMK Made) > REASSEMBLY

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. INSTALL BACK-UP LIGHT BULB
  1. Install the back-up light bulb to the back-up light socket plug.



    E300993
  1. Turn the back-up light socket plug with the back-up light bulb as shown in the illustration to install them as a unit.



2. INSTALL REAR LIGHT GASKET


    E315277
  1. Engage the 2 guides and 2 claws to install a new rear light gasket.



3. INSTALL REAR COMBINATION LIGHT PROTECTOR


    E300991
  1. Install a new rear combination light protector.