FRONT CONSOLE BOX (for TMC, TMMR Made) > INSTALLATION |
| 1. INSTALL CONSOLE BOX ASSEMBLY |
![]() |
Engage the 4 guides as shown in the illustration.
Install the console box assembly with the 2 bolts and 2 screws.
| 2. INSTALL CONSOLE BOX CARPET |
Install the console box carpet.
| 3. INSTALL NO. 4 CONSOLE BOX DUCT |
Engage the claw to install the No. 4 console box duct.
| 4. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY |
Connect the 2 connectors.
Engage the clamp.
![]() |
Engage the 2 guides and 4 clips as shown in the illustration.
Install the upper console box sub-assembly with the 2 screws.
| 5. INSTALL INSTRUMENT PANEL CUP HOLDER |
Install the instrument panel cup holder with the 4 screws.
| 6. INSTALL CONSOLE BOX CUP HOLDER |
Install the console box cup holder to the rear console upper panel sub-assembly.
| 7. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY |
Connect each connector.
![]() |
Engage the 6 clips to install the rear console upper panel sub-assembly.
Move the shift lever to P.
| 8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.
| 9. INSTALL FRONT PANEL GARNISH RH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish RH.
| 10. INSTALL FRONT PANEL GARNISH LH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish LH.