FRONT CONSOLE BOX (for TMMK Made) > INSTALLATION |
| 1. INSTALL REAR CONSOLE BOX ASSEMBLY |
![]() |
Engage the 4 guides as shown in the illustration.
Install the rear console box assembly with the 2 bolts and 2 screws.
Connect the connector and engage the clamp.
| 2. INSTALL CONSOLE BOX CARPET |
Install the console box carpet.
| 3. INSTALL NO. 4 CONSOLE BOX DUCT |
Engage the claw to install the No. 4 console box duct.
| 4. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY |
Engage the 6 clips.
Install the rear console upper panel sub-assembly with the 2 screws <C> or <D>.
Connect the connector.
Move the shift lever to P.
| 5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.
![]() |
Engage the 2 claws as shown in the illustration.
| 6. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY |
w/ Seat Heater System:
Connect each connector.
Engage the 4 clips to install the upper console box sub-assembly.