Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX (for TMC, TMMR Made)

FRONT CONSOLE BOX (for TMC, TMMR Made) > INSTALLATION

for Preparation Click here



1. INSTALL CONSOLE BOX ASSEMBLY


    B281751
  1. Engage the 4 guides as shown in the illustration.

  1. Install the console box assembly with the 2 bolts and 2 screws.



2. INSTALL CONSOLE BOX CARPET
  1. Install the console box carpet.



3. INSTALL NO. 4 CONSOLE BOX DUCT
  1. Engage the claw to install the No. 4 console box duct.



4. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY
  1. Connect the 2 connectors.

  1. Engage the clamp.



    B277990
  1. Engage the 2 guides and 4 clips as shown in the illustration.

  1. Install the upper console box sub-assembly with the 2 screws.



5. INSTALL INSTRUMENT PANEL CUP HOLDER
  1. Install the instrument panel cup holder with the 4 screws.



6. INSTALL CONSOLE BOX CUP HOLDER
  1. Install the console box cup holder to the rear console upper panel sub-assembly.



7. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY
  1. Connect each connector.



    B430431
  1. Engage the 6 clips to install the rear console upper panel sub-assembly.

  1. Move the shift lever to P.



8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B430427
  1. Turn the shift lever knob sub-assembly clockwise to install it.



    B430425
  1. Engage the 2 claws to connect the shift hole cover sub-assembly as shown in the illustration.



9. INSTALL FRONT PANEL GARNISH RH


    B386774
  1. Engage the 3 clips and 8 guides to install the front panel garnish RH.



10. INSTALL FRONT PANEL GARNISH LH


    B386775
  1. Engage the 3 clips and 8 guides to install the front panel garnish LH.