Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX (for TMMK Made)

FRONT CONSOLE BOX (for TMMK Made) > REMOVAL

for Preparation Click here



1. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY


    B377618
  1. Disengage the 4 clips and remove the upper console box sub-assembly.

  1. w/ Seat Heater System:

    1. Disconnect each connector.



2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B377615
  1. Disengage the 2 claws as shown in the illustration.



    B377616
  1. Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.



3. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY
  1. Move the shift lever to N.



    B403737
  1. Disconnect the connector.

  1. Remove the 2 screws <C> or <D>.



    B377620
  1. Disengage the 6 clips and remove the rear console upper panel sub-assembly.



4. REMOVE NO. 4 CONSOLE BOX DUCT


    B293623
  1. Disengage the claw and remove the No. 4 console box duct.



5. REMOVE CONSOLE BOX CARPET


    B377626
  1. Remove the console box carpet.



6. REMOVE REAR CONSOLE BOX ASSEMBLY


    B380929
  1. Disconnect the connector and disengage the clamp.



    B405578
  1. Remove the 2 bolts and 2 screws.



    B380931
  1. Pull the rear console box assembly in the direction indicated by the arrow to disengage the 4 guides and remove the rear console box assembly.