FRONT CONSOLE BOX (for TMC, TMMR Made) > DISASSEMBLY |
| 1. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY |
![]() |
Disengage the 4 claws and 4 clips to remove the console rear end panel sub-assembly.
| 2. REMOVE REAR CONSOLE ARMREST ASSEMBLY |
![]() |
Using a screwdriver, remove the 2 E-rings.
![]() |
Using a screwdriver, pull out the box door hinge shafts.
| *1 | Protective Tape |
Remove the rear console armrest assembly.
| 3. REMOVE CONSOLE COMPARTMENT DOOR CUSHION |
![]() |
Remove the 2 screws.
![]() |
Using a screwdriver, disengage the 8 claws.
![]() |
Disengage the 2 guides to remove the console compartment door lock sub-assembly as shown in the illustration.
![]() |
Remove the 4 console compartment door cushions from the console compartment door lock sub-assembly.