Home › Vehicle Interior › INTERIOR PANELS / TRIM › FRONT CONSOLE BOX (for TMC, TMMR Made)

FRONT CONSOLE BOX (for TMC, TMMR Made) > REASSEMBLY

for Preparation Click here



1. INSTALL CONSOLE COMPARTMENT DOOR CUSHION


    B277999
  1. Install the 4 console compartment door cushions to the console compartment door lock sub-assembly.



    B277998
  1. Engage the 2 guides and temporarily install the console compartment door lock sub-assembly as shown in the illustration.



    B277996
  1. Engage the 8 claws.



    B277995
  1. Install the console compartment door lock sub-assembly with the 2 screws.



2. INSTALL REAR CONSOLE ARMREST ASSEMBLY
  1. Temporarily install the rear console armrest assembly.



    B287382
  1. Push in the box door hinge shafts by hand as far as possible.

    HINT:
    1. The illustration is for the LH side.
    2. Use the same procedure for the RH side and LH side.



    B287383E01
  1. Using pliers, push in the box door hinge shafts completely.
    Text in Illustration 
    *1
    Protective Tape

    HINT:
    1. Tape the tips of pliers before use.
    2. The illustration is for the LH side.
    3. Use the same procedure for the RH side and LH side.



    B287380
  1. Install the rear console armrest assembly with the 2 E-rings.



3. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY


    B287379
  1. Engage the 4 claws and 4 clips to install the console rear end panel sub-assembly.