NAVIGATION ANTENNA (for TMMK Made) > INSTALLATION |
| 1. INSTALL NAVIGATION ANTENNA ASSEMBLY |
Engage the 2 clamps.
Install the navigation antenna assembly with the 2 screws.
| 2. INSTALL DEFROSTER NOZZLE ASSEMBLY |
![]() |
Engage the 2 guides.
Install the defroster nozzle assembly with the 3 screws <C> or <D> or <H>.
| 3. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Engage the 2 claws.
Install the No. 2 side defroster nozzle duct with the screw <C> or <D> or <H>.
| 4. INSTALL NO. 3 HEATER TO REGISTER DUCT |
![]() |
Install the No. 3 heater to register duct with the 3 screws <C> or <D> or <H>.
Install the clip.
| 5. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Engage the 2 claws.
Install the No. 1 side defroster nozzle duct with the screw <C> or <D> or <H>.
| 6. INSTALL NO. 1 HEATER TO REGISTER DUCT |
![]() |
Install the No. 1 heater to register duct with the 3 screws <C> or <D> or <H>.
Install the clip.
| 7. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY |