Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA (for Instrument Panel Side)

NAVIGATION ANTENNA (for Instrument Panel Side) > INSTALLATION

for Preparation Click here



1. INSTALL NAVIGATION ANTENNA ASSEMBLY
  1. Engage the 2 clamps.

  1. Install the navigation antenna assembly with the 2 screws.



2. INSTALL DEFROSTER NOZZLE ASSEMBLY


    B277984
  1. Engage the 2 guides.

  1. Install the defroster nozzle assembly with the 3 screws <D>.



3. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT


    B277982
  1. Engage the 2 claws.

  1. Install the No. 1 side defroster nozzle duct with the screw <D>.



4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT


    B281908
  1. Engage the 2 claws.

  1. Install the No. 2 side defroster nozzle duct with the screw <D>.



5. INSTALL NO. 3 HEATER TO REGISTER DUCT (for LHD)


    B281907
  1. Install the No. 3 heater to register duct with the 3 screws <D>.

  1. Install the clip.



6. INSTALL HEATER TO REGISTER DUCT ASSEMBLY (for RHD)
  1. Engage the heater to register duct assembly to the ion generator assembly.



    B281904
  1. Install the heater to register duct assembly with the 3 screws <D>.

  1. Install the clip.



7. INSTALL NO. 1 HEATER TO REGISTER DUCT (except LHD with Ion Generator)


    B281903
  1. Install the No. 1 heater to register duct with the 3 screws <D>.

  1. Install the clip.



8. INSTALL HEATER TO REGISTER DUCT ASSEMBLY (for LHD with Ion Generator)
  1. Engage the heater to register duct assembly to the ion generator assembly.



    B281905
  1. Install the heater to register duct assembly with the 3 screws <D>.

  1. Install the clip.



9. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY
(Click here)