WINDSHIELD DEICER SWITCH > INSPECTION |
| 1. INSPECT FRONT WINDOW DEICER SWITCH |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 3 (IG) - 6 (E) | Front window deicer switch on | Below 1 Ω |
| 3 (IG) - 6 (E) | Front window deicer switch off | 10 kΩ or higher |
| *a | Component without harness connected (Front Window Deicer Switch) |
![]() |
Apply battery voltage and check that the front window deicer switch indicator illuminates.
| Tester Connection | Specified Condition |
| Battery positive (+) → 3 (IG) Battery negative (-) → 7 (D) | Front window deicer switch illuminates |
| *a | Component without harness connected (Front Window Deicer Switch) |
| *b | Front Window Deicer Switch Indicator |