Home › General › SPECIFICATIONS › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS > SERVICE DATA



VSC OFF Switch (for TMMK Made) 
Tester Connection
Switch Condition
Specified Condition
6 (+) - 3 (E)
Switch pushed
Below 1 Ω
6 (+) - 3 (E)
Switch not pushed
10 kΩ or higher

VSC OFF Switch (for TMC, TMMR Made) 
Tester Connection
Switch Condition
Specified Condition
9 (+) - 6 (E)
Switch pushed
Below 1 Ω
9 (+) - 6 (E)
Switch not pushed
10 kΩ or higher

Brake Pedal Load Sensing Switch 
Tester Connection
Switch Condition
Specified Condition
2 (FSW+) - 1 (FSW-)
Switch OFF (Brake pedal depressed)
950 to 1050 Ω
2 (FSW+) - 1 (FSW-)
Switch ON (Brake pedal released)
203 to 223 Ω