EGR VALVE > INSPECTION |
| 1. INSPECT EGR VALVE ASSEMBLY |
![]() |
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected (EGR Valve Assembly) |
| Tester Connection | Condition | Specified Condition |
| 5 (+B2) - 4 (EGR1) | 20°C (68°F) | 18 to 22 Ω |
| 5 (+B2) - 6 (EGR3) | ||
| 2 (+B1) - 1 (EGR4) | ||
| 2 (+B1) - 3 (EGR2) |