REAR SUNSHADE SWITCH > INSTALLATION |
| 1. INSTALL REAR SUNSHADE SWITCH ASSEMBLY |
Engage the 2 claws to install the rear sunshade switch assembly.
| 2. INSTALL FRONT CONSOLE UPPER PANEL GARNISH |
for Blank Type:
![]() |
Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.
for 3 Switch Hole Type:
Connect each connector.
![]() |
Engage the 2 claws to install the front console upper panel garnish as shown in the illustration.
| 3. INSTALL FRONT PANEL GARNISH LH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish LH.
| 4. INSTALL FRONT PANEL GARNISH RH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish RH.