Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > PRECAUTION

for Preparation Click here



1.PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
  1. After the ignition switch is turned off, the radio and display receiver assembly records various types of memory and settings. As a result, after turning the ignition switch off, make sure to wait at least 80*1 or 90*2 seconds before disconnecting the cable from the negative (-) battery terminal.
    *1: w/ DVD Player
    *2: w/o DVD Player
  2. When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the terminal is reconnected.

    System Name
    See Procedure
    Parking Assist Monitor System
    Click here


2.IGNITION SWITCH EXPRESSIONS
  1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

    Expression
    Ignition Switch
    (Position)
    Engine Switch
    (Condition)
    Ignition Switch off
    LOCK
    Off (Lock)
    Ignition Switch ACC
    ACC
    On (ACC)
    Ignition Switch ON
    ON
    On (IG)
    Engine Start
    START
    On (Start)


3.PRECAUTION FOR AUDIO AND VISUAL SYSTEM
  1. If replacing any of the following parts, refer to Initialization of Repair Instruction (Click here).

    1. Telematics transceiver*
    *: w/ Manual (SOS) Switch