POWER SEAT SWITCH (for TMMK Made) > INSTALLATION |
| 1. INSTALL FRONT POWER SEAT SWITCH |
Install the front power seat switch to a new front seat cushion shield with the 3 screws.
| 2. INSTALL FRONT SEAT CUSHION SHIELD |
for Driver Side:
Engage the 4 claws to install the front lumbar power seat switch to the front seat cushion shield.
Connect the front power seat switch connector.
Engage the wire harness clamp.
Engage the 2 claws to install the front seat cushion shield.
Install the screw.
| 3. CONNECT SEPARATE TYPE FRONT SEATBACK COVER |
Connect the 2 rubber bands of the separate type front seatback cover.
| 4. INSTALL RECLINING POWER SEAT SWITCH KNOB |
Engage the 4 claws to install the reclining power seat switch knob.
| 5. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
Engage the 4 claws to install the slide and vertical power seat switch knob.
| 6. INSTALL FRONT SEAT ASSEMBLY |