WIRELESS CHARGER ASSEMBLY > INSTALLATION |
| 1. INSTALL MOBILE WIRELESS CHARGER CRADLE ASSEMBLY |
Connect the connector.
Engage the clamp.
![]() |
Engage the 2 guides and 4 clips as shown in the illustration.
![]() |
Install the mobile wireless charger cradle assembly with the 2 screws.
| 2. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY |
Connect each connector.
![]() |
Engage the 6 clips to install the rear console upper panel sub-assembly.
Move the shift lever to P.
| 3. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Turn the shift lever knob sub-assembly clockwise to install it.
![]() |
Engage the 2 claws to connect the shift hole cover sub-assembly as shown in the illustration.
| 4. INSTALL FRONT PANEL GARNISH RH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish RH.
| 5. INSTALL FRONT PANEL GARNISH LH |
![]() |
Engage the 3 clips and 8 guides to install the front panel garnish LH.