POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM > CUSTOMIZE PARAMETERS |
| 1. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM |
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Tilt & Telescopic / Utility / Customize..
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
| Autoaway/Return function | ON | Turn the auto away/return function | ON/OFF | Multiplex tilt and telescopic ECU |