Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › THEFT DETERRENT SYSTEM

THEFT DETERRENT SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE THEFT DETERRENT SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the intelligent tester

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Utility / Customize / Security.

    5. Select the setting by referring to the table below.

      Security 
      Display
      Default
      Content
      Setting
      Relevant ECU
      Security control with mechanism key*
      OFF
      This function makes it possible to cancel the security alarm with the mechanical key.
      ON or OFF
      Main Body ECU (Multiplex Network Body ECU)

      1. *: w/o Wireless Door Lock Buzzer Answer Back Function and w/ Smart Entry and Start System

    6. Enter the following menus: Body / Main Body / Utility / Customize / Wireless Door Lock.

    7. Select the setting by referring to the table below.

      Wireless Door Lock 
      Display
      Default
      Content
      Setting
      Relevant ECU
      Panic Function*
      ON
      This function operates the theft deterrent system when the panic switch is pressed and held for 0.8 seconds.
      ON or OFF
      Main Body ECU (Multiplex Network Body ECU)

      1. *: w/ Panic Switch