Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SYSTEM

SLIDING ROOF SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE SLIDING ROOF SYSTEM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function(s) can be customized.
  2. Be sure to make notes of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Customizing with the intelligent tester

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Utility / Customize / Power Window.

    5. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Door Key P/W Up*
      OFF
      This function is used to close the power windows and sliding roof by operating the mechanical key.
      OFF/ON
      Main body ECU (Multiplex network body ECU)
      Door Key P/W Down*
      OFF
      This function is used to open the power windows and sliding roof by operating the mechanical key.
      OFF/ON
      Main body ECU (Multiplex network body ECU)
      P/W Up W/ Transmit*
      OFF
      This function is used to close the power windows and sliding roof using the wireless key transmitter.
      OFF/ON
      Main body ECU (Multiplex network body ECU)
      P/W Down W/ Transmit*
      OFF
      This function is used to open the power windows and sliding roof using the wireless key transmitter.
      OFF/ON
      Main body ECU (Multiplex network body ECU)

      1. *: except TMMK Made

    6. Enter the following menus: Body / Sliding Roof / Utility / Customize / Slide Roof.

    7. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Door Key Related Operation*
      Slide
      Function to select tilt up or slide open of sliding roof key-linked function.
      Slide/Tilt
      Sliding roof ECU (Sliding roof drive gear sub-assembly)
      Wireless Key Related Operation*
      Slide
      Function to select tilt up or slide open of sliding roof wireless transmitter-linked function.
      Slide/Tilt
      Sliding roof ECU (Sliding roof drive gear sub-assembly)
      Front SW Auto Operation
      ON
      This function is used to enable or disable the auto operation.
      OFF/ON
      Sliding roof ECU (Sliding roof drive gear sub-assembly)

      1. *: except TMMK Made

    8. Enter the following menus: Body / Main Body / Utility / Customize / Security.

    9. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      Slide Roof Open Warning
      ON
      This function is used to enable or disable the sliding roof open warning.
      OFF/ON
      Main body ECU (Multiplex network body ECU)