Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Front Door Windows)

POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on Front Door Windows) > CUSTOMIZE PARAMETERS

for Preparation Click here



1. CUSTOMIZE POWER WINDOW CONTROL SYSTEM

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make notes of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:
The following items can be customized.

  1. Customizing with the GTS

    1. Connect the GTS to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Customize Setting / Power Window.

    5. Select the setting by referring to the table below.

      Display
      Default
      Content
      Setting
      Relevant ECU
      D Window Auto Up
      ON
      This function is used to enable or disable the auto up function for the driver door window using the power window regulator master switch assembly.
      OFF/ON
      Power window regulator motor assembly (for driver door)
      D Window Auto Down
      ON
      This function is used to enable or disable the auto down function for the driver door window using the power window regulator master switch assembly.
      OFF/ON
      Power window regulator motor assembly (for driver door)
      P Window Auto Up
      ON
      This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly.
      OFF/ON
      Power window regulator motor assembly (for front passenger door)
      P Window Auto Up From Driver
      ON
      This function is used to enable or disable the remote auto up function for the front passenger door window using the power window regulator master switch assembly.
      OFF/ON
      Power window regulator motor assembly (for front passenger door)
      P Window Auto Down
      ON
      This function is used to enable or disable the auto down function for the front passenger door window using the power window regulator switch assembly.
      OFF/ON
      Power window regulator motor assembly (for front passenger door)
      P Window Auto Down From Driver
      ON
      This function is used to enable or disable the remote auto down function for the front passenger door window using the power window regulator master switch assembly.
      OFF/ON
      Power window regulator motor assembly (for front passenger door)