POWER WINDOW CONTROL SYSTEM (for Models with Jam Protection Function on 4 Windows) > CUSTOMIZE PARAMETERS |
| 1. CUSTOMIZE POWER WINDOW CONTROL SYSTEM |
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Utility / Customize / Power Window.
Select the setting by referring to the table below.
| Tester Display | Default | Content | Setting | Relevant ECU |
| Door Key P/W Up | OFF | This function is used to close the windows by operating the mechanical key. | OFF/ON | Main body ECU (Multiplex network body ECU) |
| Door Key P/W Down | OFF | This function is used to open the windows by operating the mechanical key. | OFF/ON | Main body ECU (Multiplex network body ECU) |
| P/W Up W/ Transmit | OFF | This function is used to close the windows using the wireless key transmitter. | OFF/ON | Main body ECU (Multiplex network body ECU) |
| P/W Down W/ Transmit | OFF | This function is used to open the windows using the wireless key transmitter. | OFF/ON | Main body ECU (Multiplex network body ECU) |
| D Window Auto Up* | Avail | This function is used to enable or disable the auto up function for the driver door window using the multiplex network master switch assembly. | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| D Window Auto Down* | Avail | This function is used to enable or disable the auto down function for the driver door window using the multiplex network master switch assembly. | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| P Window Auto Up | Avail | This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger door). | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| P Window Auto Up From Driver | Avail | This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly. | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| P Window Auto Down* | Avail | This function is used to enable or disable the auto down function for the front passenger door window using the power window regulator switch assembly. | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| P Window Auto Down From Driver* | Avail | This function is used to enable or disable the remote auto down function for the front passenger door window using the multiplex network master switch assembly. | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| RR Window Auto Up | Avail | This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear RH door). | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| RR Window Auto Up From Driver | Avail | This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly. | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| RR Window Auto Down* | Avail | This function is used to enable or disable the auto down function using the rear power window regulator switch assembly (for RH door). | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| RR Window Auto Down From Driver* | Avail | This function is used to enable or disable the remote auto down function for the rear RH door window using the multiplex network master switch assembly. | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| RL Window Auto Up | Avail | This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear LH door). | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| RL Window Auto Up From Driver | Avail | This function is used to enable or disable the remote auto up function for the rear LH door window using the multiplex network master switch assembly. | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| RL Window Auto Down* | Avail | This function is used to enable or disable the auto down function using the rear power window regulator switch assembly (for LH door). | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
| RL Window Auto Down From Driver* | Avail | This function is used to enable or disable the remote auto down function for the rear LH door window using the multiplex network master switch assembly. | Not Avl/Avail | Power window ECU (Power window regulator motor assembly) |
Enter the following menus: Body / Main Body / Utility / Customize / Wireless Door Lock.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
| P/W Wireless Ope Buzz | ON | This function turns the wireless power window buzzer response on or off. | OFF/ON | Main body ECU (Multiplex network body ECU) |