SEAT BELT WARNING SYSTEM (w/o Occupant Classification System) > CUSTOMIZE PARAMETERS |
| 1. CUSTOMIZE SEAT BELT WARNING SYSTEM |
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Combination Meter / Utility / Customize / Warning.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
| Driver Side Seatbelt Warning Buzzer | ON | Function to sound the driver seat belt warning buzzer | ON/OFF | Combination meter assembly |