Home › Vehicle Exterior › WINDOW / GLASS › HEATED WINDSHIELD DEFROSTER SYSTEM

HEATED WINDSHIELD DEFROSTER SYSTEM > OPERATION CHECK

for Preparation Click here



CHECK HEATED WINDSHIELD DEFROSTER SYSTEM
  1. Start the engine.

  2. Check that the windshield glass (No. 1 heated windshield defroster) and windshield glass (No. 2 heated windshield defroster) becomes warm by operating the front window deicer switch.



  3. B385986E01
  4. Confirm that heated windshield defroster system operation stops after approximately 4 minutes.

    NOTICE:
    If the ambient temperature is 5°C (41°F) or higher, or if a malfunction of the ambient temperature sensor (thermistor assembly) is detected, the HWD1 relay will be deactivated and the front window deicer switch indicator light will blink.

    Text in Illustration 
    *1
    Front Window Deicer Switch
    *a
    Indicator Light