Home › Vehicle Interior › SEAT › LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMMK Made Power Seat)

LUMBAR SUPPORT ADJUSTER ASSEMBLY (for TMMK Made Power Seat) > INSPECTION

for Preparation Click here



1. INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


    B161051E22
  1. Check the operation of the lumbar support adjuster assembly.

    1. Check that the front seat back moves smoothly when the battery is connected to the lumbar support adjuster assembly connector terminals.

      OK:
      Battery Connection
      Operational Direction
      Battery positive (+) → Terminal 1
      Battery negative (-) → Terminal 2
      Seat back moves forward
      Battery positive (+) → Terminal 2
      Battery negative (-) → Terminal 1
      Seat back moves backward

      Text in Illustration 
      *a
      Component without harness connected
      (Lumbar Support Adjuster Assembly LH)
      If the result is not as specified, replace the lumbar support adjuster assembly LH.