DTC C1224 NE Signal |
| DTC No. | DTC Detection Condition | Trouble Area |
| C1224 | The vehicle speed is 6 km/h (4 mph) or more, the +BS terminal voltage is between 9.6 and 16.5 V, and the engine speed signal is more than 12800 rpm for 2.5 seconds or more. |
|
| 1.CHECK CAN COMMUNICATION SYSTEM |
Check if a CAN communication system DTC is output (Click here).
| Result | Proceed to |
| DTC is not output. | A |
| DTC is output. | B |
|
| ||||
| A | |
| 2.CHECK SFI SYSTEM |
Check if an SFI system DTC is output (Click here for 2GR-FE, Click here for 2AR-FE or Click here for 6AR-FSE).
| Result | Proceed to |
| DTC is not output. | A |
| DTC is output. | B |
|
| ||||
| A | ||
| ||