Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT SWITCH (for TMC, TMMR Made)

VANITY LIGHT SWITCH (for TMC, TMMR Made) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the LH side.



1. INSTALL VISOR ASSEMBLY
  1. Install the visor assembly LH with the 2 screws.



2. INSTALL VISOR BRACKET COVER


    B278993
  1. Engage the 4 claws to install the visor bracket cover.