Home › Vehicle Interior › LIGHTING (INT) › VANITY LIGHT SWITCH (for TMMK Made)

VANITY LIGHT SWITCH (for TMMK Made) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH side and LH side.
  2. The following procedure is for the LH side.



1. REMOVE VISOR BRACKET COVER


    B278992
  1. Using a moulding remover, disengage the 4 claws and remove the visor bracket cover.



2. REMOVE VISOR ASSEMBLY


    B278994
  1. Remove the 2 screws and visor assembly LH.