Home › Vehicle Interior › METER / GAUGE / DISPLAY › CLOCK

CLOCK > INSTALLATION

for Preparation Click here



1. INSTALL CLOCK ASSEMBLY
  1. Engage the 6 claws to install the clock assembly.

  1. Install the clock assembly with No. 2 bezel with the 2 screws.



2. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
  1. Connect the connector.



    B384416
  1. Engage the 4 clips to install the No. 2 instrument panel register assembly.

    NOTICE:
    When installing the No. 2 instrument panel register assembly, check that the wire harness is not caught between the No. 2 instrument panel register assembly and duct.



3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B283351
  1. Engage the 7 clips and 2 guides to install the center instrument cluster finish panel sub-assembly.



4. ADJUST CLOCK