REAR SEATBACK HEATER (for Fold Down Seat Type) > INSPECTION |
| 1. INSPECT REAR SEATBACK HEATER LH (SEPARATE TYPE REAR SEATBACK COVER) |
![]() |
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected (Rear Seatback Heater LH (Separate Type Rear Seatback Cover)) |
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Always | 3.19 to 3.82 Ω |
| 2. INSPECT REAR SEATBACK HEATER RH (SEPARATE TYPE REAR SEATBACK COVER) |
![]() |
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected (Rear Seatback Heater RH (Separate Type Rear Seatback Cover)) |
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Always | 3.19 to 3.82 Ω |