ION GENERATOR > INSTALLATION |
| 1. INSTALL ION GENERATOR SUB-ASSEMBLY |
Install the ion generator sub-assembly with the 3 screws.
| 2. INSTALL NO. 1 AIR PURIFIER AIR DUCT |
Engage the 2 claws to install the No. 1 air purifier air duct.
| 3. INSTALL ION GENERATOR SUB-ASSEMBLY WITH BRACKET |
Install the ion generator sub-assembly with bracket with the 3 screws.
| 4. INSTALL HEATER TO REGISTER DUCT ASSEMBLY (for LHD) |
Engage the heater to register duct assembly to the ion generator assembly.
![]() |
Install the heater to register duct assembly with the 3 screws <D>.
Install the clip.
| 5. INSTALL HEATER TO REGISTER DUCT ASSEMBLY (for RHD) |
Engage the heater to register duct assembly to the ion generator assembly.
![]() |
Install the heater to register duct assembly with the 3 screws <D>.
Install the clip.
| 6. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY |