Home › Vehicle Interior › HEATING / AIR CONDITIONING › ION GENERATOR

ION GENERATOR > REMOVAL

for Preparation Click here



1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY
(Click here)


2. REMOVE HEATER TO REGISTER DUCT ASSEMBLY (for LHD)


    B281905
  1. Remove the clip.

  1. Remove the 3 screws <C>.

  1. Disengage the heater to register duct assembly from the ion generator assembly, to remove the heater to register duct.



3. REMOVE HEATER TO REGISTER DUCT ASSEMBLY (for RHD)


    B281904
  1. Remove the clip.

  1. Remove the 3 screws <C>.

  1. Disengage the heater to register duct assembly from the ion generator assembly, to remove the heater to register duct.



4. REMOVE ION GENERATOR SUB-ASSEMBLY WITH BRACKET


    E301559E01
  1. Remove the 3 screws and ion generator sub-assembly with bracket.
    Text in Illustration 
    *A
    for LHD
    *B
    for RHD



5. REMOVE NO. 1 AIR PURIFIER AIR DUCT


    E301561E01
  1. Disengage the 2 claws to remove the No. 1 air purifier air duct.
    Text in Illustration 
    *A
    for LHD
    *B
    for RHD



6. REMOVE ION GENERATOR SUB-ASSEMBLY


    E301563E01
  1. Remove the 3 screws and ion generator sub-assembly.
    Text in Illustration 
    *A
    for LHD
    *B
    for RHD