REAR SEAT CUSHION HEATER (for Reclining Seat Type) > INSTALLATION |
| 1. INSTALL BENCH TYPE REAR SEAT CUSHION COVER (REAR SEAT CUSHION HEATER SUB-ASSEMBLY) |
Temporarily install the bench type rear seat cushion cover (rear seat cushion heater sub-assembly) to the bench type rear seat cushion pad.
Using hog ring pliers, install 24 new hog rings.

Using hog ring pliers, install the bench type rear seat cushion cover (rear seat cushion heater sub-assembly) to the bench type rear seat cushion pad with 40 new hog rings.

| 2. INSTALL REAR SEAT CUSHION LOCK HOOK |
![]() |
Engage the 2 claws to install a new rear seat cushion lock hook as shown in the illustration.
| 3. INSTALL REAR SEAT CUSHION ASSEMBLY |
Place the rear seat cushion assembly in the cabin.
Pass the 2 rear seat inner belt assemblies through the rear seat cushion assembly.
Connect the 2 seat heater connectors.
![]() |
Engage the 2 rear seat cushion frame hooks on the front side of the rear seat cushion assembly to the 2 rear seat cushion lock hooks as shown in the illustration.
Confirm that the rear seat cushion assembly is securely installed.