Home › Vehicle Interior › INTERIOR PANELS / TRIM › REAR SUNSHADE SWITCH

REAR SUNSHADE SWITCH > INSPECTION

for Preparation Click here



1. INSPECT REAR SUN SHADE SWITCH ASSEMBLY


    E124884E03
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    6 (ECU) - 3 (E2)
    Rear sunshade switch pushed
    Below 1 Ω
    6 (ECU) - 3 (E2)
    Rear sunshade switch not pushed
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Rear Sunshade Switch Assembly)