Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for Radio and Display Type)

DTC    B157E    Bluetooth Antenna Disconnected

for Preparation Click here


DESCRIPTION

This DTC is stored when a malfunction occurs in the "Bluetooth" antenna which is connected to the navigation ECU.
The "Bluetooth" antenna is built into the radio and display receiver assembly.

DTC No.
DTC Detection Condition
Trouble Area
B157E
"Bluetooth" antenna is not connected
  1. Navigation ECU
  2. Radio and display receiver assembly
  3. Antenna cord sub-assembly (for "Bluetooth")

INSPECTION PROCEDURE

1.REPLACE ANTENNA CORD SUB-ASSEMBLY (for "Bluetooth")
  1. Replace the antenna cord sub-assembly (for "Bluetooth") with a new or known good one (Click here).

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check that no DTCs are output.

    OK:
    No DTCs are output.



NG
Go to step 2
OK

END 

2.REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY
  1. Replace the radio and display receiver assembly with a new or known good one (Click here).

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check that no DTCs are output.

    OK:
    No DTCs are output.



NG
REPLACE NAVIGATION ECU (Click here)
OK

END