Home › Engine / Hybrid System ยท 6AR-FSE › ENGINE MECHANICAL › DRIVE BELT

DRIVE BELT > REMOVAL

for Preparation Click here



1. REMOVE FRONT WHEEL RH


2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH
  1. Remove the 3 screws and front wheel opening extension pad RH.



3. REMOVE ENGINE UNDER COVER RH
  1. Remove the 3 screws, 3 clips and engine under cover RH.



4. REMOVE FRONT FENDER APRON SEAL RH
  1. Remove the 2 bolts, clip and front fender apron seal RH.



5. REMOVE V-RIBBED BELT


    A338463
  1. Attach a wrench to the hexagonal portion of the V- ribbed belt tensioner assembly as shown in the illustration, rotate the V-ribbed belt tensioner assembly clockwise, and remove the V-ribbed belt.