Home › Engine / Hybrid System · 6AR-FSE › LUBRICATION › OIL LEVEL SENSOR

OIL LEVEL SENSOR > INSPECTION

for Preparation Click here



1. INSPECT ENGINE OIL LEVEL SENSOR


    A329046E01
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Engine Oil Level Sensor)
    *b
    Engine Oil Level Sensor Body
    *c
    ON
    *d
    OFF

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - Engine oil level sensor body
    ON
    Below 1 Ω
    OFF
    1 kΩ or higher

    If the result is not as specified, replace the engine oil level sensor.