Home › Engine / Hybrid System ยท 6AR-FSE › ENGINE CONTROL › INTEGRATION RELAY

INTEGRATION RELAY > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 RELAY BLOCK COVER


2. REMOVE NO. 1 INTEGRATION RELAY


    A254789
  1. Disconnect the No. 1 integration relay connector.



    A338581E01
  1. Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and separate the No. 1 integration relay from the engine room relay block and junction block assembly.
    Text in Illustration 
    *1
    No. 1 Integration Relay
    *a
    Protective Tape



    A254791
  1. Disconnect the 4 No. 1 integration relay connectors to remove the No. 1 integration relay.