Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM

DTC    B15A8    DCM Malfunction

for Preparation Click here


DESCRIPTION

This DTC is stored if the telematics transceiver detects a malfunction in itself, such as internal hardware failure or SIM connection error.

DTC No.
DTC Detection Condition
Trouble Area
B15A8
Error in EEPROM or PLL IC is detected.
Telematics transceiver

INSPECTION PROCEDURE

NOTICE:
  1. Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Registration for Telematics System (Click here).
  2. Regardless of whether DTC B15A8 has been output as a present or history DTC, the telematics transceiver should be replaced.

1.REPLACE TELEMATICS TRANSCEIVER
  1. Replace the telematics transceiver with a new one (Click here).


NEXT

PERFORM REGISTRATION (Click here)