Home › Audio / Visual / Telematics › TELEMATICS › TELEMATICS SYSTEM

DTC    U0100    Lost Communication with ECM / PCM "A"

for Preparation Click here


DESCRIPTION

This DTC is stored when a malfunction occurs in the CAN communication system.

DTC No.
DTC Detection Condition
Trouble Area
U0100
CAN reception error
CAN communication system

INSPECTION PROCEDURE

1.CHECK DTC
  1. Turn the ignition switch off.

  1. Connect the GTS to the DLC3.

  1. Turn the ignition switch to ON and wait for 20 seconds.

  1. Turn the GTS on.

  1. Check for DTCs and check that no DTCs are output (Click here).

    OK:
    No DTCs are output.



NG
GO TO CAN COMMUNICATION SYSTEM (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)