Home
›
Engine / Hybrid System ยท 2AR-FE
›
LUBRICATION
›
OIL PUMP
OIL PUMP > REMOVAL > Preparation
SST
09213-54015
Crankshaft Pulley Holding Tool
09330-00021
Companion Flange Holding Tool
09950-50013
Puller C Set
(09951-05010)
Hanger 150
(09952-05010)
Slide Arm
(09953-05020)
Center Bolt 150
(09954-05011)
Claw No.1
EQUIPMENT
Container
-
Hose
-
Oil pressure gauge
-
Torque wrench
-
Protective tape
-
Wooden block
-
Vernier caliper
-
LUBRICANT / Standard Oil Grade
Oil Grade
Oil Viscosity (SAE)
API grade SL "Energy-Conserving", SM "Energy-Conserving", SN "Resource-Conserving" or ILSAC multigrade engine oil
0W-20 5W-20 5W-30 10W-30
API grade SL, SM or SN multigrade engine oil
15W-40 20W-50
LUBRICANT / Standard Capacity
Item
Specified Condition
Drain and refill with oil filter change
4.4 liters (4.6 US qts, 3.9 Imp. qts)
Drain and refill without oil filter change
4.0 liters (4.2 US qts, 3.5 Imp. qts)
Dry fill
5.3 liters (5.6 US qts, 4.7 Imp. qts)
RECOMMENDED TOOLS
09012-2C520
Deep Socket Wrench
24mm
-
09080-1C111
Toyota Electrical Tester Set
-
09080-2C101
Test Lead Set
-
SSM
Toyota genuine seal packing black, three bond 1207B or equivalent
-
Toyota genuine adhesive 1344, three bond 1344 or equivalent
-