Home › Vehicle Exterior › BODY PANEL › QUARTER WHEEL HOUSING OUTER PANEL › 2017.09–2018.04
BM33A0E _01 Vehicle Exterior _067228 BODY PANEL _0327727 QUARTER WHEEL HOUSING OUTER PANEL F

BODY PANEL  QUARTER WHEEL HOUSING OUTER PANEL  ASSEMBLY REPLACEMENT  


K140663

With the quarter panel assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.
K108827

Cut and Join Location

a.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K142443C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A LH - -
K108837

Adhesive - -



b.

A is reused.

HINT:

B indicates weld to remove for easier removal.


K140160C01
2.542,3.281 2.406,3.281 2.406,3.281 1.781,2.417 false 0.208,0.208 0.521,0.365 0.313,0.156 10 false *A 2.604,3.177 2.917,3.333 0.313,0.156 10 false A 0.938,0.677 1.188,0.833 0.25,0.156 10 false B:
*A LH - -



c.

Remove the quarter wheel house gusset front.

K140162C01
3.135,2.521 5.125,3.156 5.125,3.156 5.271,3.156 false 0.208,0.198 0.521,0.354 0.313,0.156 10 false *A 5.302,3.052 5.615,3.208 0.313,0.156 10 false *1
*A LH - -
*1 QUARTER WHEEL HOUSE GUSSET FRONT - -



d.

Be careful when cutting as foamed sealing material is located near the cutting position.

K142444C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A LH - -
K108840

Foamed Sealing Material - -



e.

After removing the quarter panel inner front and roof side panel outer, remove the quarter wheel house panel outer.

K142445C01
3.802,1.24 5.479,0.688 5.479,0.688 5.625,0.688 false 2.24,1.385 2.354,1.385 2.354,1.385 2.917,1.677 false 1.896,1.781 2.042,1.781 2.042,1.781 2.344,2.188 false 0.208,0.208 0.521,0.365 0.313,0.156 10 false *A 2.073,1.292 2.385,1.448 0.313,0.156 10 false *1 5.656,0.594 5.969,0.75 0.313,0.156 10 false *2 2.281,0.938 2.594,1.094 0.313,0.156 10 false *a 1.719,1.677 2.031,1.833 0.313,0.156 10 false *3
*A LH - -
*1 QUARTER PANEL INNER FRONT *2 ROOF SIDE PANEL OUTER
*3 QUARTER WHEEL HOUSE PANEL OUTER - -
*a 15 mm (0.59 in.) - -


K142446C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A LH - -



f.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K142447C01
0.229,0.208 0.542,0.365 0.313,0.156 10 false *A
*A LH - -
K108837

Adhesive - -


K140168C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A LH - -


K140170C01
0.031,0.01 0.344,0.167 0.313,0.156 10 false *A 0.156,0.25 0.469,0.406 0.313,0.156 10 false *B 3.646,0.281 3.958,0.438 0.313,0.156 10 false *C
*A LH *B PATTERN 1
*C PATTERN 2 - -
K111603

Laser Screw Welding - -



g.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K142448C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -



h.

A is reused.

HINT:

B indicates weld to remove for easier removal.


K140176C01
1.427,3.521 1.594,3.521 1.594,3.521 2.26,2.281 false 0.177,0.135 0.49,0.292 0.313,0.156 10 false *A 1.281,3.417 1.594,3.573 0.313,0.156 10 false A 2.635,0.802 2.948,0.958 0.313,0.156 10 false B:
*A RH - -



i.

Remove the quarter wheel house gusset front.

K140178C01
2.208,3.219 2.375,3.219 2.375,3.219 3.958,2.427 false 0.208,0.208 0.521,0.365 0.313,0.156 10 false *A 2.031,3.115 2.344,3.271 0.313,0.156 10 false *1
*A RH - -
*1 QUARTER WHEEL HOUSE GUSSET FRONT - -



j.

Be careful when cutting as foamed sealing material is located near the cutting position.

K142449C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A RH - -
K108840

Foamed Sealing Material - -



k.

After removing the quarter panel inner front and roof side panel outer, remove the quarter wheel house panel outer.

K142450C01
4.292,1.708 5.521,0.948 5.521,0.948 5.667,0.948 false 4.802,2.135 5.333,1.688 5.333,1.688 5.479,1.688 false 1.51,1 1.656,1 1.656,1 3.396,1.656 false 0.208,0.208 0.521,0.365 0.313,0.156 10 false *A 5.708,0.844 6.021,1 0.313,0.156 10 false *1 1.333,0.906 1.646,1.063 0.313,0.156 10 false *2 5.51,1.594 5.823,1.75 0.313,0.156 10 false *3 4.75,0.938 5.063,1.094 0.313,0.156 10 false *a
*A RH - -
*1 QUARTER PANEL INNER FRONT *2 ROOF SIDE PANEL OUTER
*3 QUARTER WHEEL HOUSE PANEL OUTER - -
*a 15 mm (0.59 in.) - -


K142451C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A RH - -



l.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K140174C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -


K140184C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A RH - -


K140186C01
0.021,0.021 0.333,0.177 0.313,0.156 10 false *A 0.177,0.25 0.49,0.406 0.313,0.156 10 false *B 3.646,0.271 3.969,0.448 0.323,0.177 10 false *C
*A RH *B PATTERN 1
*C PATTERN 2 - -
K111603

Laser Screw Welding - -




INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108830

Fillet Weld
K108831

Butt Weld
K108835

Assembly Mark

a.

For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

K140173C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A LH - -



b.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Apply a light coat of adhesive around the plug welding points.

·

Apply enough adhesive to the panels.



K142447C01
0.229,0.208 0.542,0.365 0.313,0.156 10 false *A
*A LH - -
K108837

Adhesive - -


K142452C01
0.052,0.031 0.365,0.188 0.313,0.156 10 false *A 0.167,0.26 0.479,0.417 0.313,0.156 10 false *B 0.448,1.479 0.76,1.635 0.313,0.156 10 false *a 3.646,0.26 3.958,0.417 0.313,0.156 10 false *C
*A LH *B PATTERN 1
*C PATTERN 2 - -
*a 15 mm (0.59 in.) - -
K111603

Laser Screw Welding - -



c.

Weld the quarter wheel house panel outer to the vehicle side.

K140169C01
1.094,1.594 1.229,1.594 1.229,1.594 1.604,1.823 false 0.208,0.219 0.521,0.375 0.313,0.156 10 false *A 0.948,1.5 1.26,1.656 0.313,0.156 10 false *1
*A LH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -



d.

Be careful when welding as foamed sealing material is located near the area that is cut and joined together.

K142453C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A LH - -
K108840

Foamed Sealing Material - -



e.

Weld the quarter panel inner front and roof side panel outer to the vehicle side.

K142454C01
0.646,1.854 0.792,1.854 0.792,1.854 1.146,1.938 false 2.021,1.906 3.198,2.219 3.198,2.219 3.313,2.219 false 0.208,0.208 0.521,0.365 0.313,0.156 10 false *A 0.479,1.76 0.792,1.917 0.313,0.156 10 false *1 3.344,2.104 3.656,2.26 0.313,0.156 10 false *2
*A LH - -
*1 QUARTER PANEL INNER FRONT *2 ROOF SIDE PANEL OUTER



f.

Weld the quarter wheel house gusset front to the vehicle side.

K140163C01
3.188,2.448 4.573,3.385 4.573,3.385 4.719,3.385 false 0.208,0.208 0.521,0.365 0.313,0.156 10 false *A 4.771,3.271 5.083,3.427 0.313,0.156 10 false *1
*A LH - -
*1 QUARTER WHEEL HOUSE GUSSET FRONT - -



g.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:

Apply enough adhesive to the panels.


K142443C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A LH - -
K108837

Adhesive - -



h.

Weld the A to the vehicle side.

K140161C01
1.792,2.385 2.125,3.063 2.125,3.063 2.26,3.063 false 0.208,0.208 0.521,0.365 0.313,0.156 10 false *A 2.323,2.979 2.479,3.177 0.156,0.198 10 false A
*A LH - -



i.

For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.

K140175C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A RH - -



j.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Apply a light coat of adhesive around the plug welding points.

·

Apply enough adhesive to the panels.



K140174C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -


K142455C01
0.052,0.031 0.365,0.188 0.313,0.156 10 false *A 0.167,0.26 0.479,0.417 0.313,0.156 10 false *B 3.646,0.26 3.958,0.417 0.313,0.156 10 false *C 3.063,1.49 3.375,1.646 0.313,0.156 10 false *a
*A RH *B PATTERN 1
*C PATTERN 2 - -
*a 15 mm (0.59 in.) - -
K111603

Laser Screw Welding - -



k.

Weld the quarter wheel house panel outer to the vehicle side.

K140185C01
2.813,1.813 3.229,1.479 3.229,1.479 3.333,1.479 false 0.208,0.208 0.521,0.365 0.313,0.156 10 false *A 3.354,1.375 3.667,1.531 0.313,0.156 10 false *1
*A RH - -
*1 QUARTER WHEEL HOUSE PANEL OUTER - -



l.

Be careful when welding as foamed sealing material is located near the area that is cut and joined together.

K142456C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A RH - -
K108840

Foamed Sealing Material - -



m.

Weld the quarter panel inner front and roof side panel outer to the vehicle side.

K142457C01
2.458,1.938 3.188,1.781 3.188,1.781 3.323,1.781 false 0.479,2.385 0.594,2.385 0.594,2.385 1.573,1.802 false 0.208,0.219 0.521,0.375 0.313,0.156 10 false *A 3.354,1.667 3.667,1.823 0.313,0.156 10 false *1 0.302,2.281 0.615,2.438 0.313,0.156 10 false *2
*A RH - -
*1 QUARTER PANEL INNER FRONT *2 ROOF SIDE PANEL OUTER



n.

Weld the quarter wheel house gusset front to the vehicle side.

K140179C01
2.625,3.156 2.844,3.156 2.844,3.156 3.979,2.5 false 0.219,0.208 0.531,0.365 0.313,0.156 10 false *A 2.448,3.042 2.76,3.198 0.313,0.156 10 false *1
*A RH - -
*1 QUARTER WHEEL HOUSE GUSSET FRONT - -



o.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:

Apply enough adhesive to the panels.


K142448C01
0.208,0.208 0.521,0.365 0.313,0.156 10 false *A
*A RH - -
K108837

Adhesive - -



p.

Weld the A to the vehicle side.

K140177C01
2.604,2.177 2.948,1.979 2.948,1.979 3.156,1.979 false 0.198,0.125 0.51,0.281 0.313,0.156 10 false *A 3.24,1.875 3.552,2.031 0.313,0.156 10 false A
*A RH - -



q.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting/coating)


r.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.