Home › Vehicle Exterior › BODY PANEL › FRONT BODY PILLAR(for Type B) › 2017.09–2018.04
BM33A0E _01 Vehicle Exterior _067228 BODY PANEL _0327822 FRONT BODY PILLAR(for Type B) F

BODY PANEL  FRONT BODY PILLAR(for Type B)  CUT AND JOIN REPLACEMENT SECTIONS (PATTERN 2)  


K140654

With the cowl top side panel assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location
K108828

Cut Location for Supply Parts

a.

Remove the front body pillar upper outer.

K142689C01
2.448,1.875 1.75,0.76 1.75,0.76 1.333,0.76 false 1.156,0.667 1.469,0.823 0.313,0.156 10 false *1
*1 FRONT BODY PILLAR UPPER OUTER - -
K111603

Laser Screw Welding - -


K142690C01
1.281,2.177 1.594,2.333 0.313,0.156 10 false *a
*a 170 mm (6.69 in.) - -


K142691


b.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K142692C01
0,0 0,0 false
K108837

Adhesive - -



c.

Remove the front body pillar reinforce sub-assembly lower and roof side rail.

K142693C01
2.875,1.604 2.031,0.729 2.031,0.729 1.573,0.729 false 2.594,3.573 3.021,3.333 3.021,3.333 3.365,3.333 false 1.385,0.625 1.698,0.781 0.313,0.156 10 false *1 3.417,3.24 3.729,3.396 0.313,0.156 10 false *2
*1 ROOF SIDE RAIL *2 FRONT BODY PILLAR REINFORCE SUB-ASSEMBLY LOWER
K111603

Laser Screw Welding - -


K142694C01
2.938,2.24 3.25,2.396 0.313,0.156 10 false *a
*a 190 mm (7.48 in.) - -


K142695


d.

Remove the cowl top side panel sub-assembly.

K142696C01
3.865,1.885 4.781,1.615 4.781,1.615 5.156,1.615 false 5.229,1.521 5.542,1.677 0.313,0.156 10 false *1
*1 COWL TOP SIDE PANEL SUB-ASSEMBLY - -



e.

Remove the roof side rail sub-assembly inner, front body pillar lower inner and cowl side panel.

K142698C01
4.74,4.75 5.167,4.75 5.167,4.75 5.667,4.521 false 2.188,1.292 2.708,0.24 2.708,0.24 3.052,0.24 false 1.875,2.188 2.531,1.865 2.531,1.865 2.885,1.865 false 3.094,0.146 3.406,0.302 0.313,0.156 10 false *1 2.948,1.76 3.26,1.917 0.313,0.156 10 false *2 4.542,4.646 4.854,4.802 0.313,0.156 10 false *3 2.25,3.063 2.563,3.219 0.313,0.156 10 false *a
*1 ROOF SIDE RAIL SUB-ASSEMBLY INNER *2 FRONT BODY PILLAR LOWER INNER
*3 COWL SIDE PANEL - -
*a 135 mm (5.31 in.) - -


K142697C01
2.885,1.885 3.198,2.042 0.313,0.156 10 false *a
*a 240 mm (9.45 in.) - -



f.

When replace only the outer panel, please cut off a necessary range depending on a damage range.

i.

Carefully cut the outer panel so not to damage the reinforcement.


ii.

Make sure that butt welding does not heat-affect the reinforcement when welding the outer panel.




INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108827

Cut and Join Location
K108830

Fillet Weld
K108831

Butt Weld
K108834

Body Sealer

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

If the entire supply part is not needed, remove the part of the supply part that is needed.

K142699C01
2.094,2.604 2.531,2.323 2.531,2.323 2.854,2.323 false 5.635,1.854 6.073,1.573 6.073,1.573 6.396,1.573 false 6.458,1.5 6.771,1.656 0.313,0.156 10 false *1 2.917,2.25 3.229,2.406 0.313,0.156 10 false *2 2.594,3.198 2.906,3.354 0.313,0.156 10 false *a 4.385,2.177 4.698,2.333 0.313,0.156 10 false *b
*1 ROOF SIDE RAIL SUB-ASSEMBLY INNER *2 COWL SIDE PANEL
*a 135 mm (5.31 in.) *b 240 mm (9.45 in.)



d.

Before temporarily installing the new parts, weld the roof side rail sub-assembly inner, front body pillar lower inner and cowl side panel with the standard number of welding points.

K142700C01
0.938,2.885 1.323,2.885 1.323,2.885 1.854,2.615 false 2.271,4.073 2.448,4.281 2.448,4.281 2.771,4.281 false 5.813,4.073 5.99,4.281 5.99,4.281 6.313,4.281 false 4,1.719 4.281,1.719 4.281,1.719 4.469,1.469 false 0.5,1.719 0.781,1.719 0.781,1.719 0.969,1.469 false 4.448,2.865 4.833,2.865 4.833,2.865 5.365,2.594 false 0.271,0.417 0.583,0.573 0.313,0.156 10 false *A 3.667,0.427 3.979,0.583 0.313,0.156 10 false *B 0.333,1.615 0.646,1.771 0.313,0.156 10 false *1 0.76,2.781 1.073,2.938 0.313,0.156 10 false *2 2.823,4.177 3.135,4.333 0.313,0.156 10 false *3 5.188,0.917 5.5,1.073 0.313,0.156 10 false *a 6.281,1.938 6.594,2.094 0.313,0.156 10 false *b 6.365,4.188 6.677,4.344 0.313,0.156 10 false *3 3.833,1.615 4.146,1.771 0.313,0.156 10 false *1 4.281,2.76 4.594,2.917 0.313,0.156 10 false *2
*A PATTERN 1 *B PATTERN 2
*1 ROOF SIDE RAIL SUB-ASSEMBLY INNER *2 FRONT BODY PILLAR LOWER INNER
*3 COWL SIDE PANEL - -
*a 15 mm (0.59 in.) *b 25 mm (0.98 in.)
K111603

Laser Screw Welding - -



e.

Before installing a new part, apply body sealer.

HINT:

Apply body sealer in an even, continuous bead.


K142717


f.

Weld the roof side rail sub-assembly inner, front body pillar lower inner and cowl side panel to the vehicle side.

K142701C01
1.875,2.823 2.802,2.573 2.802,2.573 3.125,2.573 false 1.875,2.177 2.396,1.99 2.396,1.99 2.719,1.99 false 2.198,1.281 2.542,0.396 2.542,0.396 2.865,0.396 false 2.896,0.302 3.208,0.458 0.313,0.156 10 false *1 2.76,1.896 3.073,2.052 0.313,0.156 10 false *2 3.177,2.479 3.49,2.635 0.313,0.156 10 false *3
*1 ROOF SIDE RAIL SUB-ASSEMBLY INNER *2 FRONT BODY PILLAR LOWER INNER
*3 COWL SIDE PANEL - -



g.

Before installing a new part, apply body sealer.

HINT:

Apply body sealer in an even, continuous bead.


K142719


h.

Weld the cowl top side panel sub-assembly to the vehicle side.

K142702C01
3.833,1.979 4.615,1.771 4.615,1.771 4.969,1.771 false 5.021,1.677 5.333,1.833 0.313,0.156 10 false *1
*1 COWL TOP SIDE PANEL SUB-ASSEMBLY - -



i.

If the entire supply part is not needed, remove the part of the supply part that is needed.

K142703C01
2.406,1.99 1.896,1.583 1.896,1.583 1.531,1.583 false 1.344,1.5 1.656,1.656 0.313,0.156 10 false *1 3.865,2.104 4.177,2.26 0.313,0.156 10 false *a
*1 ROOF SIDE RAIL - -
*a 70 mm (2.76 in.) - -



j.

Before temporarily installing the new parts, weld the front body pillar reinforce sub-assembly lower and roof side rail with the standard number of welding points.

K142704C01
4.896,1.104 4.531,1.104 4.531,1.104 4.094,0.802 false 4.427,2.469 4.063,2.469 4.063,2.469 3.625,2.167 false 4.958,1.021 5.271,1.177 0.313,0.156 10 false *1 4.479,2.385 4.792,2.542 0.313,0.156 10 false *2
*1 ROOF SIDE RAIL *2 FRONT BODY PILLAR REINFORCE SUB-ASSEMBLY LOWER



k.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Apply a light coat of adhesive around the plug welding points.

·

Apply enough adhesive to the panels.



K142705C01
0,0 0,0 false
K108837

Adhesive - -



l.

Weld the front body pillar reinforce sub-assembly lower and roof side rail to the vehicle side.

K142706C01
1.698,0.729 2.063,0.729 2.063,0.729 2.948,1.552 false 2.604,3.552 3.385,3.292 3.385,3.292 3.781,3.292 false 1.531,0.625 1.844,0.781 0.313,0.156 10 false *1 3.844,3.198 4.156,3.354 0.313,0.156 10 false *2
*1 ROOF SIDE RAIL *2 FRONT BODY PILLAR REINFORCE SUB-ASSEMBLY LOWER
K111603

Laser Screw Welding - -


K142707

K142708


m.

Before installing a new part, apply body sealer.

HINT:

Apply body sealer in an even, continuous bead.


K142709


n.

Weld the front body pillar upper outer to the vehicle side.

K142711C01
2.583,3.25 3.229,2.938 3.229,2.938 3.635,2.938 false 3.688,2.844 4,3 0.313,0.156 10 false *1
*1 FRONT BODY PILLAR UPPER OUTER - -
K111603

Laser Screw Welding - -


K142710


o.

After welding, apply the foamed sealing material to the corresponding parts. (See the painting/coating)


p.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


q.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.