Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.
Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.
Wipe off the remaining double-sided tape using a clean cloth or equivalent.
If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.
After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.
The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.
| *1 | LUGGAGE COMPARTMENT DOOR EMBLEM | *2 | NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE |
| *3 | NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE | - | - |
| ● | Non-reusable part | - | - |
| *1 | NO. 3 LUGGAGE COMPARTMENT DOOR PLATE | *2 | NO. 4 LUGGAGE COMPARTMENT DOOR NAME PLATE |
| ● | Non-reusable part | - | - |
INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM
INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
for LE Plate:
| *a | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 48.8 mm (1.92 in.) | B | 43.1 mm (1.70 in.) |
| C | 35.3 mm (1.39 in.) | - | - |
for SE Plate:
| *a | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 48.7 mm (1.92 in.) | B | 42.9 mm (1.69 in.) |
| C | 35.1 mm (1.38 in.) | - | - |
for GLE Plate:
| *a | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 49.4 mm (1.94 in.) | B | 37.2 mm (1.46 in.) |
| C | 31.9 mm (1.26 in.) | - | - |
for V6 Plate:
| *a | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 20.4 mm (0.803 in.) | B | 19.5 mm (0.768 in.) |
| C | 10.6 mm (0.417 in.) | - | - |
INSTALL NO. 7 LUGGAGE COMPARTMENT DOOR NAME PLATE
| *a | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 8.7 mm (0.343 in.) | B | 13.9 mm (0.547 in.) |
| C | 24.1 mm (0.949 in.) | - | - |
INSTALL NO. 4 LUGGAGE COMPARTMENT DOOR NAME PLATE
| *a | Profile of Luggage Compartment Door Panel | - | - |
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 46.7 mm (1.84 in.) | B | 23.5 mm (0.925 in.) |
| C | 21.1 mm (0.831 in.) | - | - |