Home › Engine / Hybrid System › A25A-FKS LUBRICATION › LUBRICATION SYSTEM
NM33A0E _51 Engine / Hybrid System _067340 A25A-FKS LUBRICATION _0328397 LUBRICATION SYSTEM DE DETAILS F

A25A-FKS LUBRICATION  LUBRICATION SYSTEM  DETAILS  OIL NOZZLE  


CONSTRUCTION


a.

Oil jets (No. 1 oil nozzle sub-assemblies and No. 2 oil nozzle sub-assemblies) are installed to the cylinder block sub-assembly. By squirting oil at the optimal position on the back side of the pistons, friction is reduced and durability is improved due to suppression of high temperatures which also prevents engine knock.


b.

By utilizing the electronically controlled variable volume oil pump, it is possible to control when the oil jets (No. 1 oil nozzle sub-assemblies and No. 2 oil nozzle sub-assemblies) squirt. Warming up of the pistons has been enhanced, exhaust and piston noise has been reduced, and oil consumption during normal operation has also been reduced. By using a oil nozzle valve sub-assembly to control when the oil jets operate, deviation of opening and closing timing between each oil jet has been reduced, increasing fuel economy and reducing oil consumption.


c.

By integrating a filter into the oil jets (No. 1 oil nozzle sub-assemblies and No. 2 oil nozzle sub-assemblies), potential clogging at the end of an oil jet is prevented and the outlet diameter has been reduced. This increases the flow speed of the oil jets (No. 1 oil nozzle sub-assemblies and No. 2 oil nozzle sub-assemblies) which cools the piston further and improves performance.


d.

A 2 piece pressed plate structure is used for the oil jets (No. 1 oil nozzle sub-assemblies and No. 2 oil nozzle sub-assemblies) to reduce weight.

W135880C01
0.833,0.708 0.969,0.708 0.969,0.708 1.167,1.542 true 6.01,1.781 6.344,2.281 6.344,2.281 6.448,2.281 true 0.656,0.917 0.792,0.917 0.792,0.917 0.958,1.542 true 1.344,0.927 1.479,0.927 1.479,0.927 1.646,1.552 true 2.042,0.927 2.177,0.927 2.177,0.927 2.344,1.552 true 2.729,0.927 2.865,0.927 2.865,0.927 3.031,1.552 true 1.531,0.719 1.667,0.719 1.667,0.719 1.865,1.552 true 2.219,0.719 2.354,0.719 2.354,0.719 2.552,1.552 true 2.917,0.719 3.052,0.719 3.052,0.719 3.25,1.552 true 4.135,0.979 4.448,1.135 0.313,0.156 10 false *a 6.49,2.198 6.802,2.354 0.313,0.156 10 false *b 0.49,0.833 0.802,0.99 0.313,0.156 10 false *1 0.667,0.615 0.979,0.771 0.313,0.156 10 false *2 1.177,0.833 1.49,0.99 0.313,0.156 10 false *1 1.365,0.625 1.677,0.781 0.313,0.156 10 false *2 1.875,0.844 2.188,1 0.313,0.156 10 false *1 2.052,0.625 2.365,0.781 0.313,0.156 10 false *2 2.573,0.833 2.885,0.99 0.313,0.156 10 false *1 2.75,0.635 3.063,0.792 0.313,0.156 10 false *2
*1 No. 1 Oil Nozzle Sub-assembly *2 No. 2 Oil Nozzle Sub-assembly
*a No. 1 Oil Nozzle Sub-assembly Cross Section *b Filter
V100135

Oil - -