Home › Suspension › REAR SUSPENSION › REAR SUSPENSION SYSTEM › 2017.09–2017.12
NM33A0E _53 Suspension _065978 REAR SUSPENSION _0328977 REAR SUSPENSION SYSTEM GE GENERAL F

REAR SUSPENSION  REAR SUSPENSION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

A double-wishbone type independent suspension, which consists of an upper control arm, 2 lower suspension arms and a trailing arm, is used.


b.

Through the use of optimal suspension geometry and optimal allocation of components for the rear suspension, excellent controllability and ride comfort have been achieved.


c.

The rear shock absorber assembly is located toward the front of the vehicle to ensure a spacious cargo area.


d.

A digressive type piston valve is used in the shock absorber which optimizes the damping force at very low piston speeds and middle/high piston speeds to achieve excellent shock absorbing performance and a comfortable flat ride.


e.

Through the use of bushes for all joints of the suspension components, high vibration suppression and smooth initial movement of the suspension are realized, contributing to improved ride comfort.


f.

A highly-efficient stabilizer layout ensures high roll resistance and excellent controllability.