Home › Drivetrain › UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE SYSTEM › 2017.09–2017.12
NM33A0E _52 Drivetrain _065980 UA80E AUTOMATIC TRANSMISSION / TRANSAXLE _0328979 AUTOMATIC TRANSAXLE SYSTEM DE DETAILS F

UA80E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  DETAILS  PARK/NEUTRAL POSITION SWITCH AND TRANSMISSION CONTROL SWITCH  


CONSTRUCTION


a.

The ECM uses these switches to detect the shift lever position.


b.

The park/neutral position switch assembly sends the P, R, N and D position signals to the ECM. The ECM transmits signals to the combination meter assembly for the shift position indicator (P, R, N and D) in response to the signals received from the switch.


c.

The transmission control switch is installed inside the lower shift lever assembly to inform the ECM of the shift lever position.


d.

Switch terminal S is used to detect whether the shift lever is in D or S, and terminals SFTU and SFTD are used to detect the operation of the shift lever (if it is moved forward ["+" position] or backward ["-" position]) when S mode is selected. By transmitting signals to the ECM, the transmission control switch turns on both the shift indicator and S mode indicator when the shift lever is moved to S, and indicates the selected range through shift indicator.

X137525E01
0.125,0.406 1.052,0.792 0.927,0.385 10 false from IG1 NO. 1 Relay 1.344,1.49 3.115,1.698 1.771,0.208 10 false Transmission Control Switch 2.76,0.292 2.948,0.479 0.188,0.188 10 false S 1.479,0.313 1.698,0.5 0.219,0.188 10 false IG 1.51,0.656 1.729,0.844 0.219,0.188 10 false E 2.75,0.656 3.177,0.833 0.427,0.177 10 false SFTU 2.75,1.01 3.177,1.188 0.427,0.177 10 false SFTD 5.677,0.302 5.865,0.49 0.188,0.188 10 false S 5.427,0.656 5.854,0.833 0.427,0.177 10 false SFTU 5.438,1.021 5.865,1.198 0.427,0.177 10 false SFTD 6.167,1.969 6.719,2.177 0.552,0.208 10 false ECM 5.667,1.865 5.917,2.083 0.25,0.219 10 false P 5.667,2.229 5.917,2.448 0.25,0.219 10 false R 5.667,2.594 5.875,2.833 0.208,0.24 10 false N 5.667,2.948 5.875,3.146 0.208,0.198 10 false D 5.427,3.385 5.844,3.563 0.417,0.177 10 false NSW 2.771,1.885 3.031,2.094 0.26,0.208 10 false PL 2.781,2.24 3.042,2.448 0.26,0.208 10 false RL 2.771,2.594 3.031,2.802 0.26,0.208 10 false NL 2.771,2.948 3.031,3.156 0.26,0.208 10 false DL 2.771,3.375 3.031,3.583 0.26,0.208 10 false B 1.51,3.385 1.771,3.594 0.26,0.208 10 false L 1.417,2.625 1.677,2.833 0.26,0.208 10 false RB 0.198,2.729 1.125,3.083 0.927,0.354 10 false from IG1 NO. 2 Relay 0.115,3.479 1.135,3.698 1.021,0.219 10 false to Starter Relay 1.552,3.979 2.875,4.531 1.323,0.552 10 false Park/Neutral Position Switch Assembly 0.969,4.458 1.281,4.667 0.313,0.208 10 false STA 3.125,5.063 3.604,5.292 0.479,0.229 10 false STAR 0.813,4.677 2.927,5.063 2.115,0.385 10 false Certification ECU (Smart Key ECU Assembly) 1.448,5.76 2.823,5.969 1.375,0.208 10 false Engine Switch 0.542,6.281 2.354,6.5 1.813,0.219 10 false : CAN Communication Line 5.01,5.635 6.833,5.99 1.823,0.354 10 false Shift Position and Shift Range Indicator 4.99,5.219 6.854,5.406 1.865,0.188 10 false Combination Meter Assembly 4.948,4.198 6.875,4.552 1.927,0.354 10 false Central Gateway ECU (Network Gateway ECU)