Home › Drivetrain › UB80E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE SYSTEM › 2017.09–2017.12
NM33A0E _52 Drivetrain _065981 UB80E AUTOMATIC TRANSMISSION / TRANSAXLE _0328981 AUTOMATIC TRANSAXLE SYSTEM DE DETAILS F

UB80E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  DETAILS  PLANETARY GEAR  


CONSTRUCTION


a.

The 8-speed configuration has been achieved by using 2 planetary gear units, creating an 8-speed automatic transaxle.


b.

A Ravigneaux type planetary gear unit is used as the rear planetary gear unit. The gear unit consists of pairs of sun gears (middle and rear) and planetary pinion gears (long and short) with different diameters within a single planetary gear.


c.

A centrifugal fluid pressure canceling mechanism is used in the C1, C2, C3 and C4 clutches that are applied when shifting between 1st to 8th gears.


d.

The shapes of the grooves in the clutches and brake linings have been optimized in order to reduce drag.

X136632C01
2.385,1.635 1.25,0.667 1.25,0.667 1.167,0.667 true 2.688,1.479 1.583,0.229 1.583,0.229 1.5,0.229 true 3.542,1.417 4.25,0.104 4.25,0.104 4.333,0.104 true 3.594,1.583 4.542,0.333 4.542,0.333 4.625,0.333 true 3.854,1.542 5.917,0.667 5.917,0.667 6,0.667 true 3.938,1.719 5.833,2 5.833,2 5.917,2 true 5.417,2.292 5.917,2.292 true 3.979,2.49 5.833,3.25 5.833,3.25 5.917,3.25 true 4.052,3.208 5.833,3.927 5.833,3.927 5.917,3.927 true 3.094,3.979 3.094,3.052 true 4.75,8.417 4.896,8.583 4.896,8.583 5,8.583 true 0.771,6.917 1.104,6.917 true 1.74,7.375 1.052,8.156 1.052,8.156 0.969,8.156 true 2.156,7.521 2.156,7.406 true 2.135,6.958 2.375,7.563 2.375,7.563 2.458,7.563 true 2.188,6.698 2.375,5.229 2.375,5.229 2.458,5.229 true 2.708,7.229 2.708,7.125 true 2.615,6.5 2.719,5.625 2.719,5.625 2.802,5.625 true 3.656,6.49 3.688,6.25 3.688,6.25 3.771,6.25 true 2.448,2.823 1.729,3.604 1.729,3.604 1.646,3.604 true 3.573,8.292 3.281,8.604 3.281,8.604 3.198,8.604 true 4.75,7.917 4.896,8.083 4.896,8.083 5,8.083 true 4.583,6.125 4.448,5.99 4.448,5.99 4.365,5.99 true 5.865,6.917 6.198,6.917 true 4.833,7.365 5.146,7.698 5.146,7.698 5.25,7.698 true 5.083,7 5.396,7.333 5.396,7.333 5.5,7.333 true 4.979,6.5 5.625,5.75 5.625,5.75 5.729,5.75 true 5.052,6.635 5.781,6.052 5.781,6.052 5.885,6.052 true 3.094,2.823 3.938,4.031 3.938,4.031 4.021,4.031 true 0.979,0.573 1.292,0.729 0.313,0.156 10 false *1 1.313,0.146 1.625,0.302 0.313,0.156 10 false *2 4.385,0.01 4.698,0.167 0.313,0.156 10 false *3 4.677,0.24 4.99,0.396 0.313,0.156 10 false *4 6.063,0.573 6.375,0.729 0.313,0.156 10 false *5 5.969,1.896 6.281,2.052 0.313,0.156 10 false *6 0.604,6.823 0.917,6.979 0.313,0.156 10 false *7 1.479,3.521 1.792,3.677 0.313,0.156 10 false *8 2.073,7.531 2.385,7.688 0.313,0.156 10 false *9 2.49,7.469 2.958,7.625 0.469,0.156 10 false *10 2.583,7.24 3.052,7.396 0.469,0.156 10 false *11 2.5,5.125 2.969,5.281 0.469,0.156 10 false *12 2.844,5.521 3.313,5.677 0.469,0.156 10 false *13 3.802,6.146 4.271,6.302 0.469,0.156 10 false *14 2.979,4 3.448,4.156 0.469,0.156 10 false *15 5.302,7.594 5.771,7.75 0.469,0.156 10 false *16 5.969,3.156 6.438,3.313 0.469,0.156 10 false *17 5.927,5.958 6.396,6.115 0.469,0.156 10 false *18 5.542,7.229 6.01,7.385 0.469,0.156 10 false *20 5.969,2.198 6.438,2.354 0.469,0.156 10 false *21 5.958,3.833 6.427,3.99 0.469,0.156 10 false *22 5.052,8.49 5.521,8.646 0.469,0.156 10 false *23 1.479,4.708 1.792,4.865 0.313,0.156 10 false *2 1.281,6.469 1.594,6.625 0.313,0.156 10 false *1 5.156,4.708 5.469,4.865 0.313,0.156 10 false *3 4.146,5.625 4.458,5.781 0.313,0.156 10 false *4 4.74,5.375 5.052,5.531 0.313,0.156 10 false *5 5.167,5.375 5.479,5.531 0.313,0.156 10 false *6 0.781,8.073 1.094,8.229 0.313,0.156 10 false *8 5.052,7.99 5.521,8.146 0.469,0.156 10 false *22 2.948,8.51 3.417,8.667 0.469,0.156 10 false *15 4.125,5.896 4.594,6.052 0.469,0.156 10 false *17 6.26,6.823 6.729,6.979 0.469,0.156 10 false *21 5.771,5.646 6.229,5.844 0.458,0.198 10 false *19 4.104,3.969 4.573,4.125 0.469,0.156 10 false *14
*1 C2 Clutch *2 B2 Brake
*3 B1 Brake *4 C1 Clutch
*5 C3 Clutch *6 C4 Clutch
*7 Intermediate Shaft *8 Rear Planetary Gear Unit
*9 Rear Planetary Ring Gear *10 Rear Sun Gear
*11 Middle Sun Gear *12 Short Pinion
*13 Long Pinion *14 Counter Drive Gear
*15 Counter Driven Gear *16 Front Planetary Ring Gear
*17 Front Planetary Gear Unit *18 Inner Pinion
*19 Outer Pinion *20 Front Sun Gear
*21 Input Shaft *22 Differential Drive Pinion
*23 Differential Ring Gear - -



e.

The functions of the clutches and brakes are as follows

Component Function
C1 No. 1 Clutch Connects front planetary ring gear and rear sun gear.
C2 No. 2 Clutch Connects intermediate shaft and rear planetary carrier.
C3 No. 3 Clutch Connects front planetary ring gear and middle sun gear.
C4 No. 4 Clutch Connects front planetary carrier and middle sun gear.
B1 No. 1 Brake Prevents middle sun gear from turning either clockwise or counterclockwise.
B2 No. 2 Brake Prevents rear planetary carrier from turning either clockwise or counterclockwise.
Planetary Gears These gears change the route through which driving force is transmitted, in accordance with the operation of each clutch and brake, in order to increase or reduce the input and output speeds.


f.

A tolerance ring is used to increase the lock-up range and increase fuel economy due to the reduced spline tooth clearance.

X136642C01
0.917,1.042 1.083,1.042 1.083,1.042 1.344,1.385 true 4.927,1.667 5.573,0.146 5.573,0.146 5.75,0.146 true 0.75,0.979 1.063,1.135 0.313,0.156 10 false *1 5.792,0.052 5.979,0.26 0.188,0.208 10 true *1
*1 Tolerance Ring - -




OPERATION


a.

Transaxle Power Flow

Operating Condition of Shift Solenoid Valves
Shift Position, Shift Range and Gear Range Shift Solenoid Valve
SL1 SL2 SL3 SL4 SL5 SL6 SL SLU

○: ON (Applied)

-: OFF (Release)

▲: Controlled

●: Lock-up ON/OFF

*1: Vehicle speed is 11 km/h (6.8 mph) or less.

*2: Vehicle speed is below 11 km/h (6.8 mph).

P - - - - - - ○ -
R - - ○ - - ○ ○ -
N*1 - - - - - ▲ ○ -
N*2 - - - - - - ○ -
D 1st ○ - - - - ○ ● ●
2nd ○ - - - ○ - ● ●
3rd ○ - ○ - - - ● ●
4th ○ - - ○ - - ● ●
5th ○ ○ - - - - ● ●
6th - ○ - ○ - - ● ●
7th - ○ ○ - - - ● ●
8th - ○ - - ○ - ● ●
S S1 ○ - - - - ○ ● ●
S2 ○ - - - ○ - ● ●
S3 ○ - ○ - - - ● ●
S4 ○ - - ○ - - ● ●
S5 ○ ○ - - - - ● ●
S6 - ○ - ○ - - ● ●
S7 - ○ ○ - - - ● ●
S8 - ○ - - ○ - ● ●

Operating Condition of Friction Engagement Components
Shift Position, Shift Range and Gear Range Clutch Brake
C1 C2 C3 C4 B1 B2

○: ON (Applied)

-: OFF (Release)

▲: Controlled

*1: Vehicle speed is 11 km/h (6.8 mph) or less.

*2: Vehicle speed is below 11 km/h (6.8 mph).

P - - - - - -
R - - ○ - - ○
N*1 - - - - - ▲
N*2 - - - - - -
D 1st ○ - - - - ○
2nd ○ - - - ○ -
3rd ○ - ○ - - -
4th ○ - - ○ - -
5th ○ ○ - - - -
6th - ○ - ○ - -
7th - ○ ○ - - -
8th - ○ - - ○ -
S S1 ○ - - - - ○
S2 ○ - - - ○ -
S3 ○ - ○ - - -
S4 ○ - - ○ - -
S5 ○ ○ - - - -
S6 - ○ - ○ - -
S7 - ○ ○ - - -
S8 - ○ - - ○ -

1st Gear
X134158E02
1.24,0.927 1.552,1.125 0.313,0.198 10 false B2 3.854,2.146 4.167,2.344 0.313,0.198 10 false C1 0.469,4.396 1.771,4.594 1.302,0.198 10 false : Operates 1.063,2.563 1.375,2.76 0.313,0.198 10 false C2 4.51,1.833 4.823,2.031 0.313,0.198 10 false C3 4.927,1.865 5.24,2.063 0.313,0.198 10 false C4 4.927,0.938 5.24,1.135 0.313,0.198 10 false B1

2nd Gear
X134177E02
1.229,0.927 1.458,1.115 0.229,0.188 10 false B2 4.917,0.927 5.146,1.115 0.229,0.188 10 false B1 1.052,2.573 1.281,2.76 0.229,0.188 10 false C2 3.844,2.146 4.073,2.333 0.229,0.188 10 false C1 4.51,1.844 4.74,2.031 0.229,0.188 10 false C3 4.927,1.865 5.156,2.052 0.229,0.188 10 false C4 0.521,4.417 1.229,4.615 0.708,0.198 10 false : Operates

3rd Gear
X134178E02
1.219,0.927 1.438,1.115 0.219,0.188 10 false B2 4.906,0.917 5.125,1.104 0.219,0.188 10 false B1 1.052,2.573 1.271,2.76 0.219,0.188 10 false C2 3.844,2.135 4.063,2.323 0.219,0.188 10 false C1 4.5,1.823 4.719,2.01 0.219,0.188 10 false C3 4.927,1.854 5.146,2.042 0.219,0.188 10 false C4 0.5,4.406 1.229,4.625 0.729,0.219 10 false : Operates

4th Gear
X134179E02
1.229,0.917 1.448,1.094 0.219,0.177 10 false B2 4.917,0.917 5.135,1.094 0.219,0.177 10 false B1 1.052,2.563 1.271,2.74 0.219,0.177 10 false C2 3.844,2.135 4.063,2.313 0.219,0.177 10 false C1 4.51,1.844 4.729,2.021 0.219,0.177 10 false C3 4.927,1.865 5.146,2.042 0.219,0.177 10 false C4 0.51,4.406 1.313,4.615 0.802,0.208 10 false : Operates

5th Gear
X134180E02
1.229,0.927 1.479,1.094 0.25,0.167 10 false B2 4.906,0.927 5.156,1.094 0.25,0.167 10 false B1 1.052,2.573 1.302,2.74 0.25,0.167 10 false C2 3.844,2.146 4.094,2.313 0.25,0.167 10 false C1 4.5,1.844 4.75,2.01 0.25,0.167 10 false C3 4.927,1.865 5.177,2.031 0.25,0.167 10 false C4 0.5,4.417 1.25,4.615 0.75,0.198 10 false : Operates

6th Gear
X134181E02
4.927,1.865 5.167,2.042 0.24,0.177 10 false C4 4.49,1.844 4.729,2.021 0.24,0.177 10 false C3 3.844,2.146 4.083,2.323 0.24,0.177 10 false C1 1.052,2.563 1.292,2.74 0.24,0.177 10 false C2 0.542,4.406 1.302,4.604 0.76,0.198 10 false : Operates 1.24,0.927 1.479,1.104 0.24,0.177 10 false B2 4.917,0.927 5.156,1.104 0.24,0.177 10 false B1

7th Gear
X134182E02
1.219,0.927 1.479,1.104 0.26,0.177 10 false B2 4.917,0.927 5.177,1.104 0.26,0.177 10 false B1 1.063,2.563 1.323,2.74 0.26,0.177 10 false C2 3.844,2.146 4.104,2.323 0.26,0.177 10 false C1 4.5,1.844 4.76,2.021 0.26,0.177 10 false C3 4.917,1.854 5.177,2.031 0.26,0.177 10 false C4 0.51,4.406 1.292,4.625 0.781,0.219 10 false : Operates

8th Gear
X134183E02
1.229,0.927 1.49,1.115 0.26,0.188 10 false B2 1.063,2.573 1.323,2.76 0.26,0.188 10 false C2 3.854,2.135 4.115,2.323 0.26,0.188 10 false C1 4.51,1.844 4.771,2.031 0.26,0.188 10 false C3 4.927,1.865 5.188,2.052 0.26,0.188 10 false C4 4.927,0.927 5.188,1.115 0.26,0.188 10 false B1 0.531,4.396 1.76,4.594 1.229,0.198 10 false : Operates

Reverse Gear
X134184E02
1.229,0.927 1.479,1.146 0.25,0.219 10 false B2 1.052,2.573 1.302,2.792 0.25,0.219 10 false C2 3.844,2.146 4.094,2.365 0.25,0.219 10 false C1 4.5,1.844 4.75,2.063 0.25,0.219 10 false C3 4.917,1.854 5.167,2.073 0.25,0.219 10 false C4 4.917,0.938 5.167,1.156 0.25,0.219 10 false B1 0.5,4.406 2.333,4.604 1.833,0.198 10 false : Operates