Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM
NM33A0E _54 Brake _067417 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0329247 BRAKE CONTROL SYSTEM CO CONTROL F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  CONTROL  BRAKE ASSIST  


SYSTEM CONTROL


a.

In the brake assist, based on the signals from the master cylinder pressure sensor, the skid control ECU calculates the speed and the amount of the brake pedal application and then determines the intention of the driver to perform emergency braking. If the skid control ECU determines that the driver intends to perform emergency braking, this function activates the brake actuator to increase the brake fluid pressure, which increases the brake force.

X135312E02
3.813,1.125 4.667,1.125 false 3.01,0.5 4.146,0.719 1.135,0.219 10 false Skid Control ECU 0.688,1.063 3.156,1.271 2.469,0.208 10 false Master Cylinder Pressure Sensor Signal 4.729,1.031 6.594,1.406 1.865,0.375 10 false The fluid pressure is increased by the skid control ECU 0.729,2.01 2.604,2.396 1.875,0.385 10 false The fluid pressure is increased by the brake actuator 1.323,4.917 2.208,5.135 0.885,0.219 10 false Braking Force 3.677,6.104 4.031,6.302 0.354,0.198 10 false Time 4.771,4.833 5.948,5.031 1.177,0.198 10 false With Brake Assist 4.75,5.542 6.104,5.74 1.354,0.198 10 false Without Brake Assist