Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE CONTROL SYSTEM
NM33A0E _54 Brake _067417 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0329247 BRAKE CONTROL SYSTEM DE DETAILS F

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE CONTROL SYSTEM  DETAILS  SPEED SENSOR  


CONSTRUCTION


a.

An active type speed sensor is used. This sensor contains a sensor IC.


b.

The magnet type rotor, which consists of N and S poles that are arranged in a circle, is integrated into the hub bearing inner race.

Front Speed Sensor
X137224C02
2.031,0.635 2.531,0.219 2.531,0.219 2.698,0.219 true 4.708,0.75 5.292,0.75 true 5.792,1.573 6.375,1.573 true 4.49,0.656 4.802,0.854 0.313,0.198 10 false *1 2.792,0.146 3.104,0.344 0.313,0.198 10 false *1 6.448,1.49 6.76,1.688 0.313,0.198 10 false *2
*1 Front Speed Sensor *2 Sensor Rotor


Rear Speed Sensor
X137225C02
1.146,1.458 1.813,1.458 true 5.698,1.323 6.281,1.323 true 0.938,1.375 1.25,1.573 0.313,0.198 10 false *1 6.365,1.24 6.677,1.438 0.313,0.198 10 false *2
*1 Rear Speed Sensor *2 Sensor Rotor



c.

The active type speed sensor uses a sensor IC to detect magnetic field changes caused when the sensor rotor rotates, and the sensor outputs the detected information to the skid control ECU as digital pulses (vehicle speed signal).


d.

To detect the vehicle speed, the frequency of the output pulses is used. Because the active type sensor outputs digital pulses, it can detect the vehicle speed even when the vehicle is nearly stationary.

X100132E10
1.458,1.063 2.458,1.635 1,0.573 10 Vehicle Speed 1.469,2.208 2.469,2.781 1,0.573 10 Sensor Output 4.573,1.927 5.521,2.188 0.948,0.26 10 Digital Output