FUNCTION
By using the variable cooling system that consists of the thermostat with heater, engine water pump assembly (water inlet housing) and flow shutting valve (water valve), engine warm-up capability has been enhanced, friction has been reduced and low fuel consumption has been achieved.
| *1 | Engine | *2 | Flow Shutting Valve (Water Valve) (for Heater Control) (Closed) |
| *3 | Flow Shutting Valve (Water Valve) (for ATF Control) (Closed) | *4 | Heater Radiator Unit Sub-assembly |
| *5 | ATF Warmer (Transmission Oil Cooler) | *6 | Engine Water Pump Assembly (Water Inlet Housing) |
| *7 | Water Inlet with Thermostat Sub-assembly
·
Thermostat with Heater |
*8 | Radiator Assembly |
| *9 | Flow Shutting Valve (Water Valve) (for Heater Control) (Open) | *10 | Flow Shutting Valve (Water Valve) (for ATF Control) (Open) |
| *a | Early Warm-up | *b | Heater Priority |
| *c | Output Enhancement | *d | MAX Cool |
| *e | When current is not applied to the thermostat with heater, coolant flow volume is increased, thus output is enhanced. Additionally, applying current to the thermostat with heater decreases thermostat with heater opening temperature, ensuring cooler efficiency. | *f | This discontinues coolant flow of the heater radiator unit sub-assembly, ensuring cooler efficiency. |
| *g | EGR Cooler Assembly, etc. | - | - |